Best Stained Glass Saw


Are you the one searching for best stained glass saw?

When it comes to glass cutting you need to be very careful as it can lead you to complete breakage of your glass.

If you are in love with glass  cutting then you probably understand that it is more than just a hobby or job. It needs attention seeking, hardwork, dedication to craft a masterpiece as it is a complex art.

When the need arises to create glass art, it is essential to use a good quality saw. The Best Stained Glass Saw’s diamond blade and water reservoir lets you cut perfect circles with ease. It has a unique blade mechanism which allows you to change out the blades in just seconds. This saw is also backed by a 20-year guarantee.

With increase in demand of glass, the art of glass work has increased, for which you need  best glass cutting tool to take your craft to the next level.

One of the most important thing you can invest your money is best stained glass saw, if you are in glass work it could be anything like grinding or soldering glass pieces to craft a classic model.


Stained glass work is crucial art form which involve extra care. This tool can save your much time and also enhance capabilities of an artist.

To get your hard cuts sharpen and improved, this is the best addition to your tool’s list, but there are some options which you need to consider before reaching out to any decision.


We have compiled top best stained tiled glass saw 2020 for you.


Mentioned below is the list:

1) Gemini Taurus 3 Diamond Ring

2) Skill Tile Saw 3540-02

3) Omni 2 Plus Wire Saw

4) Studio Precision 2000 Ring Saw

5) Gryphon Zephyr Ring Saw

6) Makita Cordless Tile Glass Saw

7) SKIL 3550-02 7-Inch Wet Tile Saw

8) Gryphon C-40 Band Saw

9) WEN 3959 Benchtop Band Saw

10) WEN 3962 Two-Speed Band Saw


1) Gemini Taurus 3 Diamond Ring



It perfectly fits your hand and according to your need, no matter what type of blade you prefer. It has the most powerful motor installed in it which is best for crushing small pieces. There are multiple other features which you must know.

This saw detaches from its base which makes it versatile. It is also capable of cutting large pieces. The crust we get from this saw  is precise and small.

This suits a person who is just getting started and will serve you accordingly as your skill progress.

This light duty ring saw have the capability of cutting wide range of materials like stone, glass, tiles and other materials like aluminum, silver, brass and more. It is actually virtual Ring of stainless steel and blade features a hollow center.




This Gemini Taurus 3 Ring Saw consist of fully portable system. It has flexibility and can be converted to handheld saw which helps you to cut the required material accurately. This Gemini Tuarus is perfect for glass workers, DIY fanatic and more.


There are several blades in the market for Turus 3 Ring Saw as per your requirement.

Standard Blade: It features diamond grit coating which allow cutting of material from any direction

Wire Blade:  It is ideal for cutting glass and is also ideal for denser materials.It offers omni-directional cutting with 360 degree feature

Mega Blade: It is Used for mainly back and front cutting. It is found to be one of the strongest blade available and is best for cutting much denser material.


  • Easy to use
  • Versatile
  • Precise
  • Lightweight
  • Quick ultra tough cuts
  • Great for sparking imagination
  • Saves glass
  • Plastic outer components
  • Little expensive
  • Need to run most pieces through a grinder



2) Skill Tile Saw 3540-02 



When it comes to construction of building and mega project, tiling is the most important part. There are things that could go wrong while sizing and cutting tiles and thick materials. Skil tile saw is on the top of the list to ease your work.

The Skil Tile Saw is considered  to be wet tile saw because it uses diamond coated blades for operation. This saw is built with cooling water reservoir which cools down the heated blade after cutting.

this electric and corded saw weighs 17.7 pounds & has the measurement of 18×14.5×7.8 in  dimension It has the capability to cut tiles from 0 to 45 degrees with its 7 inch cutting blade . Not just this, it also has corrossion resistant stainless steel fitted to support tiles.



Power:  It has amperage of 4.2 and no load rpm (rotation per minute) of 3600. It also comes with CULUS certification. It has the power to cut stones, tile and much harder objects.

Blades: It has blade fitted which is 7 inch in diameter that cuts 13/8 of an inch at 90 degree angle. This blade is also coated with diamond powder

Durability: Purchasing a costly saw and having rust on top of it after one month usage is not less than a short nightmare. Since the most of the saw uses water to cool down its blades but thanks to SKIL Tile saw, it uses stainless steel to make it corrosion and rust free.

Accuracy: Skil saw is on the top due to its accuracy, its adjustable rip fins perfectly fit the tile and cut it cleanly without moving an inch.

Includes: This saw comes  with 30 days money back guarantee which is surely enough to try and get your complete hands on it. One of the best thing about it is 3 years manufacturer’s limited warranty.


  • The SKIL 3540-02 is smaller in size and lighter in weight. This makes the saw absolutely fantastic for home-use
  • It is ideal for small tiling projects
  • Comes with a great warranty value
  • It has a low rpm, disabling from heavy-duty tiling work
  • The saw’s water reservoir is too small and demands refilling very frequently



3) Omni 2 Plus Wire Saw



Another bets stained saw which we can not resist to mention is omni 2 plus wire saw. It is different ring saw due to its technical feature which are unmatched in this price range.

Firstly, what grab your attentions the outset that how well it is being built. Second best thing to consider is the shape of the ring saw which gives you option of multidirectional cutting. With the help of this, you can make cuts along any direction and at any width.

Moreover, it also has cooling technology feature that allow you to work with it as long as you want. It has powerful 0.25 horsepower motor which has the ability to cut as thick pieces of glasses as it is required.

There is also spotlight which is been fitted in this saw that help you to focus on your art crafting whether it is day or night.

These highlighted features makes it the best ring saw available in the market. This versatile ring saw is also loaded up to its brim with durable wonderful round diamond studded blade.


  • Lots of replacement blades included
  • Cuts smoothly
  • Movable diamond tipped saw, whose direction can be varied
  • Powerful 0.25 horsepower motor can claw through almost any glass surface regardless of thickness
  • Spotlight and cooling features are a great addition
  • Replacement blades included for the reason that they snap often
  • A bit on the pricey side


4) Studio Precision 2000 Ring Saw



If you are in search of all in one go solution other than just cutting glass, this is the ring saw that fulfill your need. The cutting ability of this saw is immense and  can handle hard cutting materials with its adjustable blade arms.

This perfectly fits the need for one who is looking for versatile glass saw. It has long warranty with best rust free aluminum



  • Intricately cut glass, metal, wood , plastic and much more
  • Frame and interior support walls are rust-free aluminum
  • Blade guide arm adjust easily for varying material
  • Comes with one studio pro wood blade for dry cuts and 1 studio pro diamond blade for wet cuts
  • Includes rheostat for variable speed control and waterpump and reservoir to eliminate water refills.


Many times it becomes hard to saw through glass. In that case you need to borrow it from you close friend or need to buy new or rent one.

But wait, there is an easy way out

If you are the one who need to cut glasses through saw regularly and along with this you also have to deal regularly with other surfaces than this is simply the best for you. This small, versatile saw comes with 2 sharp blades which cater all your needs and requirements.

This diamond blade is built to cut especially toughest of glass surfaces without any risk of crushing or breaking it and is best suitable for wet cuts. If you are in the market and searching for multipurpose saw, this one should be on the top of the list.


  • Comes with not one, but two different kinds of blades
  • Small and ergonomic, can be placed anywhere
  • Motor is powerful enough for the vast majority of cuts you’ll make
  • Skimps on a few features like the spotlight and a working base area


5) Gryphon Zephyr Ring Saw



If you are in the market from a long time and looking for versatile, handy, extremely easy to operate and much lighter in weight glass saw, than this is the right option for you. This saw has the flexibility of round movement which can be rotated as per the requirement and need. It also gives you an option to detach saw part from it.

This is the saw which fits in your hand comfortably having strong contender. This gives you an awful professional experience when compared to other saw available in the market. It is extremely easy to use with best fitted blades and provides best user experience due to its angle, air and space.

Moreover, the detachable hand saw make sure you get the best finished cuttings edges. It can cut through any large material with its extra sharp and large diameter blade,

Moving towards general experience of this glass saw, if anyone who is familiar with glass cutting or new to this work will sure likely to enjoy with this Gryphon Zephyr Ring Saw.

The motor installed in this saw is very powerful enough to cut fine edges that works quietly and finely. All the components of this saw are crafted well together having thin saw and large base.  Although it lack some features and components but still its worth to have it in this price range.



  • ROUND BLADE – The round blade cuts in all directions, leaving a smooth edge, and eliminating the need to grind. The Zephyr + Ring Saw now includes a second blade and a set of guide wheel replacement rubber inserts. The Gryphon Zephyr will cut glass, tile, rock and all other similar hard materials.
  • LARGE WORK SURFACE – The Zephyr saw has a large work surface that is free of obstructions. The critical moving parts are shielded to minimize the abuse from the glass dust that is generated when cutting.
  • SLENDER OVERHEAD BLADE SUPPORT – Provides added visibility so the artist can have a very clear view of the material as it is cut.The overhead blade support is slender, allowing the artist to have a very clear view of the material as it is cut. In addition, the Zephyr has a deeper throat and more clearance for the glass than other consumer glass saws.
  • DUAL FUNCTION – The motor/blade assembly is a separate unit that can be removed from the base and used as a hand-held saw. This is useful for cutting items that cannot easily be brought to the table. A small water reservoir is built into the blade assembly housing and will hold enough water for a few minutes of hand-held cutting. When the saw is used in the normal configuration (installed in the base), the base will hold enough water for several hours of cutting.
  • LESS MAINTENANCE – Special attention has been given to designing the saw for quiet operation and for low maintenance. The critical moving parts are shielded to minimize the abuse from the glass dust that is generated when cutting. The highest quality bearings and wheels are used to extend the life of these critical parts.


  • Looks like a piece of art itself
  • Wonderful user experience, quiet motor
  • Large work surface
  • Does not have a flashlight or a cooling system for the blade


6) Makita Cordless Tile Glass Saw



Yet another tile glass saw which is handy, durable and cordless. This Makita Tile glass saw has sharp blades.

Its glass cutter has nickel plated tiling base and it comes with large water supply for cooling of blades and its lubrication. This best fits for the user who is regular glass cutter.



  • Makita-built motor delivers 1,600 RPM for faster and powerful cutting
  • 3-3/8″ blade delivers a maximum cutting depth of 1″ for a wide range of cutting applications
  • Compact and ergonomic design at only 12-3/8″ long
  • Weighs only 4.0 lbs. with battery (battery not included) for reduced operator fatigue
  • Nickel-plated base prevents rust and tilts from 0° to 45° for bevel cuts


  • Power – motor delivers 1,600 RPM for faster and powerful cutting
  • Capacity – 3 3/8” blade delivers a maximum cutting depth of 1” for a wide variety of cutting applications
  • Compact – ergonomic design at only 12 3/8” long and weight of only 4 lbs.
  • Precision – adjustable cutting depth up to 1” at 90 degrees and 5/8” at 45 degrees
  • Nickel-plated base prevents rust and tilts from 0° to 45° for bevel cuts
  • Weak batteries


7) SKIL 3550-02 7-Inch Wet Tile Saw



If you are the one looking for  speed and best ease of tile cutting than Skil 3550-02 is the best option for you. It has class innovative table design  and its also features Hydrolock system which allow users to get maximum results in short amount of time

For the people who are just starting out with tile saw, this one is the perfect and best model to get started.



  • Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
  • Sliding side extension provides support for tiles up to 18 x 18-inch
  • Aluminum table top is a durable, rust-resistant surface
  • Adjustable rip fence with miter gauge for accurate straight and miter cuts
  • Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types


  • Its unique and innovative HydroLock System does wonderfully what it promised to do that it contain water and maintain cleanliness. Sometimes even zero overspray.
  • Its cheaper than other DeWalt and Bosch tile saws in same segment.
  • Setting up and carrying it is super easy as it is light and has a Cord Wrap. Moreover, it doesn’t require a lot of water.
  • Diamond blade is visible when system is in place and saw is running
  • Fence is highly unsatisfactory and troublesome. From issues ranging from fence set-up to adjustments to aligning.
  • Blade guard which is made of plastic often gets clouded or muddled.
  • At professional level, cutting big or rough tiles can be difficult.


8) Gryphon C-40 Band Saw



This C-40 Band SAW is fast, quiet and reliable. This is best for lapidary work and is also good for cutting thick slab of glass. It is widely used in industries for cutting exotic materials. It is designed for cutting hard piece of material.



  • Simple construction with few moving parts
  • New High Speed Motor for fastest cutting available
  • Direct drive – no belts or pulleys
  • Powerful motor located on top, away from the water
  • Huge water reservoir under the work surface
  • One square foot of unobstructed work surface
  • Under table blade guide and new blade guide above table
  • Perfect for fragging corals
  • Well built
  • Powerful for cutting glass, ceramic, stones, mosaic
  • Easy to assemble
  • Attachable plate for making bevels
  • Little expensive

9) WEN 3959 Benchtop Band Saw



Whether you need a band saw for your basic learning, for your workshop or garage, WEN 3959 is the machine for you. I has 2.5 Amp motor installed which runs the blades at 2,500 FPM.

The cutting capability of this model is 3.5 inches deep and 9 inches wide. Another great advantage of this robust machine is the wordkspace ensured by reliable table that can be beveled to 45 Degree.



  • 2.5 amp motor rotates the blade up to 2500 feet per minute
  • Create cuts up to 3-1/2 inches deep and 9 inches wide
  • Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
  • Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
  • Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty


  • 9 inches cutting height
  • Ball bearings
  • Miter gauge
  • 2500 feet per minute
  • 5 amp powerful motor
  • Only two years warranty


10) WEN 3962 Two-Speed Band Saw



When the convenience and pursuance meet, this results in the best top level product withstand. It features 3.5 Amp powerful motor and 72 inch reliable blades that have the ability to cut up 6 inches deep and 9.75 inches wide.

It has additional feature of working light to give you operational comfort .



  • 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
  • Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
  • Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
  • Operates at two speeds of either 1520 or 2620 FPM
  • Optional stand allows for either floor standing or bench top applications
  • Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)


  • 5 amp powerful motor
  • Two-speed technology
  • Large workspace
  • Flexible work light
  • Dust collection system
  • Limited height cut


How To Chose Best Stained Glass Ring Saw?

All the Rings saws have a a table like surface with a blade called “Ring” pointed in the center of the table. Whether you need to cut simple glass or any stained or sheet glass in any shape , they are ideals for this purpose.

There are various components and features  to look upon while choosing the best Stained glass ring saw. Things you should consider first is the budget ,2nd thing which you should keep in your mind is that how often you have planned to use it.

Now lets directly jump to a guide in which we have covered the detailed process of picking up the best galss saw for your needs. Below are some of the factors to take into consideration while buying it.


– Budget

When tit comes to buying glass saws, there are range of glass saws available in the market with price range from $150 to over $1000.

There are lower range saws also available with price range from $150-$250 which is having low quality material installed or they lack in some features.

These low range saw are not preferred by many users as they are unable to make smooths cuts and can chip the glass while your working.

If you are just starting out or want to try it personally at your home or as a hobby, saws from the range of $300-$700 would perfectly fit your needs and it is also ideal for serious glass cutters cutting glasses professionally.

These saws have high capability of cutting glass into its actual shape incredible high quality blade and support.

Make sure to check these features while buying saw in this budget.


– Saw Type

There are two types of saw types used in every glass work.

Glass Ring Saws: This blade is a circular round ring saw providing 360 Degree circular surface. This allows cuts in any direction making it versatile and useful

Glass Bandsaws: This ring saw excels at cutting thicker pieces of glass. It cuts only in forward motion. It has the ability to cut woods and other materials as well.


– Blade Type

If you are planning to buy ring saw you must first consider the types of blades that comes with it. Some of them are mentioned below:

Diamond Coated Blades:  They have the ability to cut through glass smoothly and safely with its strong cutting blades.

Wood Blades: These blades are less common than diamond coated blades which is used for cutting materials without the use of water or oil

Round Blades: Round blades allow you to cut glass or material from any angle backward, forward an sideways. This is best for difficult cuts.


Final Thoughts

Here we are wrapping up our complete Best stained glass saw review guide to make it easier for you for taking decision.

Make sure that you have all your needs and requirements sorted out first as getting best stained glass saw can be tough decision. We have compiled list of top 10 best saw available in the market and get the best cuts you need.

Why worry about breaking your masterpiece while cutting? We have the best solution for you, our stained glass saw can help you give a complete shape to your glass with less effort and much precision. Grab yours now.

Leave a Reply

Your email address will not be published.